收藏立佳机械| HTM地图| 产品通道| 联系方式 欢迎光临长轴液下泵名企湖南立佳机械制造有限公司官网!
全国服务电话186-2731-1558

热门关键词: 长轴泵|立式长轴泵|长轴液下泵|多吸头排污泵 |立式冷凝泵|餐厨垃圾泵|渗滤液渣浆泵|直角齿轮箱

当前位置:首页 » 产品展示 » 立式长轴泵» LK型可抽式立式长轴泵
prevnext

LK型可抽式立式长轴泵

产品分类: 立式长轴泵
    产品流量:30-70000m3/h
    产品扬程:扬程范围7-200m
    订购热线:186-2731-1558

       LK型可抽式立式长轴泵

      Vertical Mixed Flow Pump
      LK型转子可抽式立式长轴泵产品概述
      LK型可抽式立式长轴泵适用于电厂、钢厂、自来水公司、污水处理厂、石油化工、矿山等工矿企业,以及市政给排水工程、农业灌溉、防洪排涝等工程。可以用来输送55以下的清水、雨水、铁皮坑水、污水以及海水等介质,流量范围30-70000m³/h,扬程范围7-200m。特殊设计的输送介质温度可达90
      Description
      The said series pumps are used to transfer clear water,rain water,water in iron sheet pits,sewage and seawater,servicing in power plants,iron and steel works,water supply companies,sewage treatment plants,petroleum and chemical industries,mines as well as municipal water supply and drainage projects,farmlands irriagation,flood protection and drain waterlogged farmlands,etc..The temperature of pumped media is below 550C and reaches to 900C for special design. The flow rate ranges from 30 to 20000m3/h and the headfrom 7 to 200m.
       
      LK型可抽式立式长轴泵产品特点
      1、 运行平稳,安全可靠,免抽真空启动,使用寿命周期长。
      2、 泵体积小,基础占地面积少,基础以下泵长度可以调整,适应性强。
      3、 流道简单可靠,节省泵房基建投资。
      4、 结构合理,装拆方便,维护检修容易简便。
      5、 泵效率高,降低运行成本。
      Features
      1. Operation smooth,safe and reliable,starting without exhausting vacumn,service life long.
      2. The volumn of the pump small,less occupied land area, the length under foundation adjustable,applicability strong.
      3. Flowing channel simple and reliable,saving the investment for construction of the pump house.
      4. Structure reasonable,convenient for mounting and dismantling,,easy to maintain and inspect.
      5. Efficiency high, operating cost reduced.
       
      LK型可抽式立式长轴泵型号说明
      1400LK—30Ⅰ
      500LB—55.3Ⅰ(×2、3)
      1400——泵吐出口径1400mm
      500——泵吐出口径500mm
      L———立式长轴泵
      L———立式长轴泵
      K———转子可抽芯
      B———转子不可抽芯
      30———泵的设计扬程
      55.3———泵的设计扬程
      Ⅰ———泵设计顺序(第一次设计无标示)
      Ⅰ———泵设计顺序(第一次设计无标示)
      注:对于大口径泵,一般不设计多级形式
      ×2———表示泵的级数为2级
       
      1400LK-30                                 500LB-55.3(×23)
       
      1400Outlet of the pump:1400mm              500Outlet of the pump:500mm
      L----Vertical mixed flow pump               L---Vertical mixed flow pump
      K----Pull-out rotor                         B---Non pull-out rotor
      30---Design head                            55.3---Design head
      ---Pump design class(no mark when         ---Pump design class(no mark when
      first time design)                         first time design)
      Remarks: multistage type is usually         ×2-- Stage number
      Not designed for the pump of large
      nozzle diameter.
       
      产品结构说明
      简图一. LK型立式长轴泵结构简图(型式ST)
      LK型立式长轴泵结构简图(型式ST)
      简图二. LK型立式长轴泵结构简图(型式XD)
      简图1. LK型立式长轴泵结构简图(型式XD)
      1、 LK型可抽式立式长轴泵为立式单级(多级)离心式或斜流式带导叶体结构。
      2、 泵的结构型式有泵吐出口在安装基础之上和之下(型式代号分别为S和X)、泵承受轴向力和电机承受轴向力(型式代号分别为T和D)、外接润滑水和泵自身润滑等形式。
      3、 泵安装型式有湿坑式安装或干坑式安装。
      湿坑式安装:泵下部浸没在吸水池中。
      干坑式安装:泵采用管道进水,泵吸入喇叭口与进水管道之间采用90°肘形进水弯管联接。
      4、 泵轴承为橡胶导轴承或赛龙导轴承。
      5、 泵口径在1000mm以下时,泵转子一般为不可抽形式;泵轴向水推力及转子重量一般由泵本体推力轴承承受,泵和电机之间采用弹性联接;泵吐出口位于安装面基础之上(型式代号为ST的结构形式)。如有要求,也可以由电机承受轴向水推力及转子重量;或其它结构形式的组合(型式代号为SD、XT、XD);用户如有要求, 也可以设计成可抽式结构形式。泵口径在1000mm以上时,泵转子一般为可抽形式;泵轴向水推力及转子重量一般由电机推力轴承承受,泵和电机之间采用刚性联接;泵吐出口位于安装面基础之下(型式代号为XD)。如有要求,也可以由泵承受轴向水推力及转子重量;或其它结构形式的组合(型式代号为XT、SD、ST)。用户如有要求, 也可以设计成不可抽式结构形式。
      6、 泵本体承受轴向水推力及转子重量时,泵推力轴承采用稀油润滑,推力轴承部件带Pt100测温元件测轴承温度或压力式温度计测润滑油温度。
      7、 泵轴向密封采用填料密封。
      8、 在泵安装基础上可以进行叶轮与叶轮室(转动部分与静止部分)之间间隙的调整,操作方便。
      9、 从吐出方向往泵看,电机接线盒与泵外接润滑水接管位于左侧。也可根据用户要求,布置在其它方位。
      Structure feature:
      1.   Series LK ,LB pumps are of vertical single stage and/or multistage centrifugal or     mixed flow with diffuser types.
      2.   The following structure types are available for the pump:the discharge opening above and/or under the mounting foundation(Type Code named S and X respectively);the axial thrust force born by the pump and/or by the motor(Type Code named T and D);lubricating water from outside and/or from the pump itself.
      3.   The intake sump is of wet pit and/or dry pit types.
      Wet pit type:lower part of the pump inundated in the intake sump.
      Dry pit type:the water enters into the pump,the suction bellmouth is connected with the inlet  pipe of the pump by means of elbow bend pipe of 900.
      4.   Rubber guide bearings and /or the Thordon guide bearings are available for  bearings of the pump.
      5.   Generally when the nozzle diameter of the pump is under 1000mm , non pull-out type is adopted for the rotor and the discharge opening is above the mounting foundation(Type Code named ST). In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the pump itself and  flexible connection is adopted between the pump and the motor.The thrust force and the weight of the rotor can also be born by the motor if required,or other structure types such as SD,XT,XD are available .Rotor pull-out type can also be adopted if required by clients.
      Generally when the discharge diameter of the pump is above 1000mm, pull-out type is adopted for the rotor and the discharge opening is under the mounting foundation(Type Code named XD).In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the motor and rigid connection is adopted between the pump
      and the motor. The axial thrust force and the weight of the rotor can also be born by
      the pump if required,or other structure types such as XT,SD,ST are available .Rotor non pull-out type can also be adopted if required by clients.  
      6.   When the axial thrust force and the weight of the rotor are born by pump itself,the thrust bearing of the pump is lubricated with dilute oil and is equipped with a temperature detector Pt100 to detect bearing temperature and a pressure type thermometer to detect the temperature of lubricating oil.
      7.   The antielectrochemical corrosion appliance is adopted for the part of the pump contacting the liquid to ensure the service life of the pump when seawater is pumped.
      8.   The packing seal is adopted for the axial seal of the pump.
      9.   The clearance between the impeller and the impeller chamber,i.e.the rotating component and the static component,can be easily adjusted on the pump mounting foundation.
      LK型可抽式立式长轴泵产品主要零部件材质Materials Of Major Parts
      介质 Media
      零件 Parts
      清水
      Clear water
      海水
      Seawater
      污水(含磨料)
      Sewage(incl.of abrasiv powder)
      吐出弯管
      Discharge elbow
      中间接管(外、内)
      Intermediate column  (internal & external)
      Q235-A
      HT200Ni2Cr
      0Cr18Ni9
      ZG0Cr18Ni12Mo2
      Q235-A
      导叶、吸入喇叭口
      Guide vane,
      Suction bellmouth
       
      HT200
      HT200Ni2Cr
      ZG0Cr18Ni9
      ZG0Cr18Ni12Mo2
      HT200、QT500-7
      ZG1Cr13Ni1
      叶轮
      Impeller
      ZG1Cr13Ni1 HT200
       
      ZG0Cr18Ni9
      ZG0Cr18Ni12Mo2
       
      QT500-7
      ZG1Cr13Ni1
      叶轮室、密封环
      Shroud,wearing ring
      HT200
      ZG2Cr13
       
      ZG0Cr18Ni9
      ZG0Cr18Ni12Mo2
       
      ZG1Cr13Ni1
      QT500-7
      主轴
      Main shaft
      45、2Cr13
       
       
      2Cr13、0Cr18Ni9
      0Cr18Ni12Mo2
       
      45、2Cr13
      1Cr18Ni9
      轴套
      Shaft sleeve
      45,2Cr13
      2Cr13、0Cr18Ni9
      ZG0Cr18Ni12Mo2
       
      2Cr13、1Cr18Ni9
      导轴承
      Guide bearing
      HT200+耐磨橡胶
      HT200+abrasive rubber
      HT200+赛龙
      HT200+Thordon bearing
      HT200+耐磨橡胶
      HT200+abrasive rubber
      HT200+赛龙
      HT200+Thordon bearing
      HT200+耐磨橡胶
      HT200+abrasive rubber
      HT200+赛龙
      HT200+Thordon bearing
       
      注:根据用户具体使用要求,可另选其它适合材质。铸铁材质叶轮只适用于闭式叶轮。
      Remarks:Other materials are  available at the request of clients.Cast iron is suitable only for closed type impeller.
      LK型可抽式立式长轴泵型谱图
      LK型长轴泵外形尺寸图(基本型式XD)
       

      LK型可抽式立式长轴泵

      下一篇:LB型不可抽式立式长轴泵上一篇:没有了!
      此文关键字:长轴泵,长轴泵厂家,立式长轴泵,立式长轴泵厂家

      联系立佳机械

      联系德纳森

      长轴液下泵名企湖南立佳机械制造有限公司

      全国服务电话:186-2731-1558

      手机:15111359870

      销售部:186-2731-1558

      传真:0731-85580727

      售后服务部:186-2731-1558

      邮箱:2109617044@qq.com

      地址:湖南长沙市芙蓉中路三段496号